So it should look like this: Boot the machine with SystemRescue Jump the pins with a jumper cap or anything else that you can find (paperclip etc). ![]() To put the machine into service mode you will need to remove the lid and find the FDO (Flash Descriptor Override) jumper, which is here: Once you have created the bootable USB you can shut the machine down and put it into service mode. There are instructions on the SystemRescue website on how to make it bootable. Next, download SystemRescue using and make a bootable USB drive using Rufus. I’d be interested to know if this BIOS mod also works for the 6300. ROM Firmware for 8300 Elite and 6300 Pro Business At the time of writing that was version 00.03.08 Rev.A. Take a moment to check that you are on the latest BIOS available from HP. Modify the BIOS and inject the NVMe driver.īefore proceeding with the rest of the steps.Create a SystemRescue bootable USB Drive.Upgrade your current BIOS to the latest version.These computers are now really cheap on Amazon and in they are a bargain in my opinion if you just need a basic machine work school or office work. An NVMe to PCIe Adapter, I used this one from Amazon.In order to carry out this upgrade, you will need a few things: Proceed at your own risk! Required Hardware You could very easily break your machine. This blog post contains instructions on how to modify your BIOS using a hardware programmer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |